NALONE - FIFI CLITORIAL VIBRATOR
NALONE - FIFI CLITORIAL VIBRATOR
Couldn't load pickup availability
Discover a new concept. Thought you'd seen it all? Nalone hides more than meets the eye. At first glance, it's a normal vibrator, but inside, it's cutting-edge technology at the service of pleasure.
Meet Fifi, an external clitoral stimulator that will make this toy your perfect pleasure partner. Ergonomically designed for maximum clitoral contact, it transmits strong, oscillating vibrations throughout your body.
The silicone it is made of is safe and guarantees perfect stimulation.
Specs;
- Material: Silicone and ABS
- Vibration modes: 7 sound vibration modes
- Maximum noise level: less than 50 dB
- Dimensions: 92 mm (L) x 51 mm (D)
- Charging: Lithium battery (USB charging cable included)
- 100% Waterproof

① Vibrating tip ② Accessory connection cable ③ Vibrating tip ④ Vibrating tip ⑤ Accessory Power On/Off/Advance vibration mode ⑦ Accessory connector ⑥ Power On/Off/Advance vibration mode ⑧ Charging port
Stimulation modes
- 1. Slow vibration
- 2. Average vibration
- 3. Rapid vibration
- 4. Medium pulse vibration
- 5. Rapid pulse vibration
- 6. Two short vibrations and one long one
- 7. Graded pulse vibration
How to use
- 1. To charge your vibrator, connect the charger's USB cable to a USB adapter (a 5V/1A adapter is recommended). Connect the other end of the USB cable to the base of the vibrator (on the bottom of the vibrator). While charging, a blue light on the control panel will flash to indicate that charging is in progress. Once fully charged, the light will stop flashing to indicate that it is ready for use. Please note that the first time you use it, or if you haven't used it for a long time, the light may not illuminate for a few minutes.
- 2. To turn on the vibrator, press and hold the button
for 3 seconds. - 3. If you quickly press the button
, the vibrator will switch to manual mode. Each time you press the button
The vibration mode will change, cycling through all of them. - 4. To turn off the vibrator, press and hold the “ ” button for 3 seconds
- 5. To use the FiFi 2 accessory, connect the accessory to the FiFi 2 base (Specification - Point 6). If you quickly press the " " button, the vibrator will enter manual mode. Each time you press the " " button, the vibration mode will change, cycling through all of them.
- 7. To turn off the vibrator, press and hold the button.
for 3 seconds
Warnings
- ◆ Make sure to fully charge the vibrator before use.
- ◆ Clean/disinfect your vibrator with warm water and antibacterial soap.
- ◆ Use only water-based lubricants. Never use massage oils, hand creams, or other types of lubricants.
- .◆ After use, it is recommended to clean the vibrator to prevent bacterial growth.
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share
